Fittings & Accessories
Hydraulic Hose Fittings Townsville
BSP, JIC, ORFS, NPT, SAE and metric — Pirtek Townsville carries a comprehensive range of hydraulic fittings, adaptors and couplings. Bring your machine specs or the old fitting and we'll match it.
Every thread type, matched on the spot
A hose is only as good as the fittings on each end — and the wrong thread is the single most common reason a replacement weeps or blows. Pirtek Townsville holds the biggest range of Caterpillar, metric and brass fittings in the region, alongside BSP, JIC, ORFS, NPT and SAE in straight, 45°, 90° and 135° configurations — plus the adaptors, couplings and protection that make an assembly last.
For hydraulic hose fittings, Townsville operators don't need a part number. Bring the old fitting, the hose end, or the machine make and model, and our technicians will identify the thread and build a complete assembly while you wait. And if it's something unusual or obsolete, there's a good chance we have it — or can make it. It's the same counter where we make up your hydraulic hoses.
Our competitive edge
The fittings other suppliers can't get
Caterpillar & metric experts
The biggest range of Caterpillar and metric fittings in the region — the specs that are hardest to source anywhere else.
Hard-to-find & obsolete
The biggest range of unique and obsolete fittings, so an old or unusual machine isn't a dead end.
Custom fabrication on-site
Special fittings we don't stock, made up right here from your old hose or sample.
Massive brass range
Every brass connection fitting imaginable — push-fit, BSP, compression and DOT-approved push-fit fittings.
Hydraulic Hose Fittings Townsville — Thread Types We Stock
| Thread Type | Typical Use |
|---|---|
| BSP (Parallel & Taper) | British Standard — common across Australian hydraulic equipment |
| JIC (37° flare) | Widely used on mobile plant, trucks and agricultural machinery |
| ORFS (O-ring face seal) | Leak-resistant sealing for high-vibration applications |
| Metric (DIN) | European and imported machinery |
| NPT / NPTF | National Pipe Thread — tapered sealing |
| SAE | Society of Automotive Engineers standard fittings |
Range
Fittings, Adaptors & Accessories
- Straight, 45°, 90° and 135° elbow fittings
- Banjo fittings and bulkhead fittings
- Quick-release couplings and flat-face couplers
- Adaptors, reducers and conversion fittings
- Hose clamps, sleeves, guards and fire sleeving
- Test points, ports and gauge adaptors
Not sure what you need?
Bring the old fitting or hose end, or the machine make and model. Our team will identify the correct thread and configuration and build a complete assembly on the spot.
Get a quoteHydraulic Fitting FAQs
Common questions about hydraulic hose fittings in Townsville
What thread types do you carry?
The hydraulic hose fittings Townsville machines actually run: BSP in both parallel and taper, JIC 37-degree flare, ORFS o-ring face seal, metric DIN for European and imported plant, and NPT/NPTF tapered. Straight, 45, 90 and 135-degree elbows, plus banjo and bulkhead fittings, quick-release and flat-face couplers, adaptors, reducers and conversion fittings.
I have an old machine and cannot identify the fitting. Can you match it?
That is the case we are set up for. We hold the biggest range of unique and obsolete fittings in the region, so an old or unusual machine is rarely a dead end. Bring the fitting or the old hose in — both ends if you can — and we will identify the thread and seat rather than guessing from a photograph.
Can you convert between thread types?
Yes, with adaptors, reducers and conversion fittings. Converting hydraulic hose fittings Townsville workshops hold is common on imported plant, where a metric machine meets BSP equipment. Worth saying plainly though: a stacked column of adaptors is a leak waiting to happen, so where we can we will make up a hose with the correct end fitting instead of adapting our way there.
What if the fitting I need is not in stock?
If we do not have it, it gets made up right here from your old hose or a sample rather than ordered in and waited on. Custom fabrication on site is a normal part of the counter service, and it is usually the difference between a machine back in service today and one sitting until next week.
Need fittings or a complete hose assembly?
Call the Pirtek Townsville team or send your details — we respond fast because we know downtime costs money.